aMG Labkit F4S

Product Code:amglabkitf4s

Be the first to review this product

Availability: Out of stock

฿5,360.00

Price as configured: ฿5,360.00

Quick Overview

Functionally the same as FiO Std with superior specifications:

  • Faster speed: 168MHz with Hardware Floating Point (For better DSP and computation intensive applications)
  • Faster real-time Hardware in the Loop test: 1kHz Closed Loop, 2kHz Open Loop
  • More memory: 1MB Flash, 192kB RAM (Expandable to 192 + 512kB RAM with FiO 2)
  • More IO: upto 140 GPIO pins (with FiO 2)
  • More periphals: Camera, Ethernet, ...
  • More new powerful hardware.

  • 1x STM32F4DISCOVERY Board (STM32F407VG, 168MHz) or FiO2 (STM32F417IG)
  • 1x aMG F4 Connect 2 (Motherboard with expansion slots)
  • 1x aMG USB Converter - N2 (2-Channels USB-Serial/SPI/I2C Converter enable upto 2kHz HIL Test per channel)
  • 2x 1.5 Ft USB 2.0 Cable
  • 1x  aMG Power Supply 9V 1A
  • Nylon Spacer Basic Set (4x6m-I/I, 4x10mm-I/E)
  • ST Link V2 (FiO 2 requires ST Link to program the MCU.) (Optional)
  • Carrying Box (Optional)
  •  

    Matlab & Simulink

    Supported Matlab / Simulink Software (Waijung Blockset)

    aMG Lab Kit F4S Discovery

    More Views

    Details

    Functionally the same as FiO Std with superior specifications:

  • Faster speed: 168MHz with Hardware Floating Point (For better DSP and computation intensive applications)
  • Faster real-time Hardware in the Loop test: 1kHz Closed Loop, 2kHz Open Loop
  • More memory: 1MB Flash, 192kB RAM (Expandable to 192 + 512kB RAM with FiO 2)
  • More IO: upto 140 GPIO pins (with FiO 2)
  • More periphals: Camera, Ethernet, ...
  • More new powerful hardware.

  • 1x STM32F4DISCOVERY Board (STM32F407VG, 168MHz) or FiO2 (STM32F417IG)
  • 1x aMG F4 Connect 2 (Motherboard with expansion slots)
  • 1x aMG USB Converter - N2 (2-Channels USB-Serial/SPI/I2C Converter enable upto 2kHz HIL Test per channel)
  • 2x 1.5 Ft USB 2.0 Cable
  • 1x  aMG Power Supply 9V 1A
  • Nylon Spacer Basic Set (4x6m-I/I, 4x10mm-I/E)
  • ST Link V2 (FiO 2 requires ST Link to program the MCU.) (Optional)
  • Carrying Box (Optional)
  • Supported Matlab / Simulink Software (Waijung Blockset)

    FiO 2 MCU (STM32F417IG) Features

    Core: ARM 32-bit Cortex™-M4 CPU with Floating Point Unit, Adaptive real-time accelerator (ART Accelerator™) allowing 0-wait state execution from Flash memory, frequency up to 168 MHz, memory protection unit, 210 DMIPS/1.25 DMIPS/MHz (Dhrystone 2.1), and DSP instructions
    ■ Memories
       – Up to 1 Mbyte of Flash memory
       – Up to 192+4 Kbytes of SRAM including 64-Kbyte of CCM (core coupled memory) data RAM 
       – Flexible static memory controller supporting Compact Flash, SRAM, PSRAM, NOR and NAND memories
    ■ LCD parallel interface, 8080/6800 modes
    ■ Clock, reset and supply management 
       – 1.8 V to 3.6 V application supply and I/Os
       – POR, PDR, PVD and BOR 
       – 4-to-26 MHz crystal oscillator
       – Internal 16 MHz factory-trimmed RC (1% accuracy)
       – 32 kHz oscillator for RTC with calibration
       – Internal 32 kHz RC with calibration
    ■ Low power
       – Sleep, Stop and Standby modes
       – VBAT supply for RTC, 20×32 bit backup registers + optional 4 KB backup SRAM
    ■ 3×12-bit, 2.4 MSPS A/D converters: up to 24 channels and 7.2 MSPS in triple interleaved mode
    ■ 2×12-bit D/A converters
    ■ General-purpose DMA: 16-stream DMA controller with FIFOs and burst support
    ■ Up to 17 timers: up to twelve 16-bit and two 32-bit timers up to 168 MHz, each with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input
    ■ Debug mode – Serial wire debug (SWD) & JTAG interfaces – Cortex-M4 Embedded Trace Macrocell™
    ■ Up to 140 I/O ports with interrupt capability – Up to 136 fast I/Os up to 84 MHz – Up to 138 5 V-tolerant I/Os
    ■ Up to 15 communication interfaces 
    – Up to 3 × I2C interfaces (SMBus/PMBus)
    – Up to 4 USARTs/2 UARTs (10.5 Mbit/s, ISO 7816 interface, LIN, IrDA, modem control)
    – Up to 3 SPIs (37.5 Mbits/s), 2 with muxed full-duplex I2S to achieve audio class accuracy via internal audio PLL or external clock
    – 2 × CAN interfaces (2.0B Active)
    – SDIO interface
    ■ Advanced connectivity
    – USB 2.0 full-speed device/host/OTG controller with on-chip PHY
    – USB 2.0 high-speed/full-speed device/host/OTG controller with dedicated DMA, on-chip full-speed PHY and ULPI
    – 10/100 Ethernet MAC with dedicated DMA: supports IEEE 1588v2 hardware, MII/RMII
    ■ 8- to 14-bit parallel camera interface up to 54 Mbytes/s
    ■ Cryptographic acceleration: hardware acceleration for AES 128, 192, 256, Triple DES, HASH (MD5, SHA-1), and HMAC
    ■ True random number generator
    ■ CRC calculation unit
    ■ 96-bit unique ID
    ■ RTC: subsecond accuracy, hardware calendar


    Additional Information

    Free Shipping No

    You may also be interested in the following product(s)

    FiO Mote - ST Starter Pack

    FiO Mote - ST Starter Pack

    ฿1,080.00
    aMG Labkit - F4 Beginner

    aMG Labkit - F4 Beginner

    From: ฿10,270.00

    To: ฿10,450.00

    FiO Glide Starter Pack

    FiO Glide Starter Pack

    ฿3,740.00
    aMG OV7670 Camera Kit

    aMG OV7670 Camera Kit

    ฿850.00
    aMG Labkit F4N

    aMG Labkit F4N

    From: ฿6,950.00

    To: ฿7,420.00

    Product Tags

    Use spaces to separate tags. Use single quotes (') for phrases.

    Write Your Own Review

    You're reviewing: aMG Labkit F4S

    How do you rate this product? *

      1 star 2 stars 3 stars 4 stars 5 stars
    Ratings
    Pros Cons
    Enter your Pros, separated by comma Enter your Cons, separated by comma