FiO Mote - ST

Product Code:fiomote-st

Be the first to review this product

Availability: 34 in stock

฿450.00

Quick Overview

  • Based on ARM Cortex-M0 STM32F072CB MCU
    • 48MHz CPU Frequency Max
    • 128 KB Flash
    • 16 KB RAM
    • 37 GPIO
    • Timers: 1 Advanced, 6 General Purpose, 2 Basic
    • Comms: 2 SPI, 2 I2C, 4 USART (+LIN), 1 CAN, 1 USB, 1 CEC
    • 10 Channels 12-bits ADC 
    • 2 Channels 12-bits DAC 
    • 2.0 - 3.6 V
  • All IO pins available via pin headers upto 37 pins
  • Pin compatible with FiO Glide and other stackable add-on modules, for examples;
    • Temperture/Humidity/Pressure/Light Sensors module
    • Current sense module (to aid low power design)
    • Power supply module
    • Motor driver module
  • Onboard 8MHz crystal (for HSE clock)
  • SWD Debugger port available
  • Program via built-in STMicroelectronics' UART IAP Protocol (aMG USB Connect required for USB-to-serial conversion)
  • Support Automatic Compile and Download when working with Matlab & Simulink, Waijung Blockset, and STM32F0 Target
  •  

    Matlab & Simulink

    Supported Matlab / Simulink Software (Waijung Blockset)

OR

FiO Mote - ST

More Views

Details

Pinout

FiO Mote ST Pinout

Key Features

  • Core: ARM®32-bit Cortex®-M0 CPU, frequency up to 48 MHz
  • Memories
    • 64 to 128 Kbytes of Flash memory
    • 16 Kbytes of SRAM with HW parity
  • CRC calculation unit
  • Reset and power management
    • Digital & I/Os supply: VDD= 2.0 V to 3.6 V
    • Analog supply: VDDA= VDDto 3.6 V
    • Selected I/Os: VDDIO2= 1.65 V to 3.6 V
    • Power-on/Power down reset (POR/PDR)
    • Programmable voltage detector (PVD)
    • Low power modes: Sleep, Stop, Standby
    • VBATsupply for RTC and backup registers
  • Clock management
    • 4 to 32 MHz crystal oscillator
    • 32 kHz oscillator for RTC with calibration
    • Internal 8 MHz RC with x6 PLL option
    • Internal 40 kHz RC oscillator
    • Internal 48 MHz oscillator with automatic trimming based on ext. synchronization
  • Up to 87 fast I/Os
    • All mappable on external interrupt vectors
    • Up to 68 I/Os with 5V tolerant capability and 19 with independent supply VDDIO2
  • 7-channel DMA controller
  • One 12-bit, 1.0 μs ADC (up to 16 channels)
    • Conversion range: 0 to 3.6 V
    • Separate analog supply: 2.4 V to 3.6 V
  • One 12-bit D/A converter (with 2 channels)
  • Two fast low-power analog comparators with programmable input and output
  • Up to 24 capacitive sensing channels for touchkey, linear and rotary touch sensors
  • Calendar RTC with alarm and periodic wakeup from Stop/Standby
  • 12 timers
    • One 16-bit advanced-control timer for 6 channel PWM output
    • One 32-bit and seven 16-bit timers, with up to 4 IC/OC, OCN, usable for IR control decoding or DAC control
    • Independent and system watchdog timers
    • SysTick timer
  • Communication interfaces
    • Two I2C interfaces supporting Fast Mode Plus (1 Mbit/s) with 20 mA current sink; one supporting SMBus/PMBus and wakeup
    • Four USARTs supporting master synchronous SPI and modem control; two with ISO7816 interface, LIN, IrDA, auto baud rate detection and wakeup feature
    • Two SPIs (18 Mbit/s) with 4 to 16 programmable bit frames, and with I2S interface multiplexed
    • CAN interface
    • USB 2.0 full-speed interface, able to run from internal 48 MHz oscillator and with BCD and LPM support
  • HDMI CEC wakeup on header reception
  • Serial wire debug (SWD)
  • 96-bit unique ID
  • All packages ECOPACK®2

Additional Information

Free Shipping Free Shipping

You may also be interested in the following product(s)

aMG PWS 3V3/5V v2

aMG PWS 3V3/5V v2

฿250.00
FiO Glide Starter Pack

FiO Glide Starter Pack

฿3,740.00
aMG CAN/LIN - CAN

aMG CAN/LIN - CAN

฿290.00
aMG USB Connect

aMG USB Connect

฿350.00
FiO Glide

FiO Glide

฿1,490.00
FiO Mote - ST Starter Pack

FiO Mote - ST Starter Pack

฿1,080.00

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Write Your Own Review

You're reviewing: FiO Mote - ST

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Ratings
Pros Cons
Enter your Pros, separated by comma Enter your Cons, separated by comma