5 Item(s)

per page

Grid  List 

Set Descending Direction
  1. 3V E2032 Lithium Battery for aMG High Precision RTC Module

    3V Lithium Battery

    Learn More
    1 in stock


  2. Character LCD Module

    Character LCD Module

    • 3 lines 16 characters (EA DOGM163W-A and EA LED55x31A) with 3.65 mm. font, black characters on amber backlight ( EA-DOGM Series http://www.lcd-module.com/products/dog.html)
    • 3.3-5V character LCD module
    • RoHS compliant.

    ** Remark :  Additional Instructions on using the character LCD. 
    The LCD glass is not broken. It is fitted with protective stickers which must be peeled off both on the front and back of the glass as shown in the picture. 
    Only remove the protective stickers from BOTH sides of the LCD glass. BUT do not remove anything from the LED (lighting element) panel. 
    Learn More
    18 in stock


  3. Loong Max Li-Po TIPPLE 5C 1000mA

    Loong Max Li-Po TIPPLE 5C 1000mA

    • Capacity: 1000mAh
    • Voltage: 2S1P (7.4v) 2 cell
    • Discharge Rate: 20C
    • Size: 66x35x10mm 
    • Charge Plug: JST-XH 

    Learn More

    Out of stock

  4. Servo SG91R (9g)

    Servo SG91R (9g)

    • Dimension: 23*12.2*29mm
    • Stall torque: 1.8kg/cm(4.8V)
    • Operating speed: 0.1sec/60degree(4.8v)
    • Operating voltage: 4.8V
    • Work with 3.3VDC Supply also - by experiment
    • Cord length 24.5cm
    • Temperature range: 0℃ - 55℃
    • Dead band width: 10us

    Learn More
    24 in stock


  5. ST-LINK/V2

    ST-LINK/V2 (ST-LINK/V2 in-circuit debugger/programmer for STM8 and STM32 Active )

    • 5 V power supplied by a USB connector 
    • USB 2.0 full speed compatible interface 
    • USB standard A to mini B cable 
    • SWIM specific features
      - 1.65 V to 5.5 V application voltage supported on SWIM interface 
      - SWIM low-speed and high-speed modes supported
      - SWIM programming speed rate: 9.7 Kbytes/s in low speed and 12.8 Kbytes/s in high speed
      - SWIM cable for connection to the application via an ERNI standard vertical connector (ref: 284697 or 214017) or horizontal connector (ref: 214012)
      - SWIM cable for connection to the application via a pin header or a 2.54 mm pitch connector 
    • JTAG/serial wire debugging (SWD) specific features 1.65 V to 3.6 V application voltage supported on the JTAG/SWD interface and 5 V tolerant inputs 
    • JTAG cable for connection to a standard JTAG 20-pin pitch 2.54 mm connector JTAG supported SWD and serial wire viewer (SWV) communication supported 
    • Direct firmware update feature supported (DFU) 
    • Status LED which blinks during communication with the PC 
    • Operating temperature 0 to 50 °C
    Learn More
    12 in stock


5 Item(s)

per page

Grid  List 

Set Descending Direction