10 Item(s)

per page

Grid  List 

Set Descending Direction
  1. aMG MotorCtrl 4 upto +15VDC 1.4A

    aMG MotorCtrl 4

    • Based on On Semiconductor LV8406T Motor Driver
    • 2-channel forward/reverse motor driver.
    • Maximum +15V DC 1.4A per channel.
    • Built-in low voltage reset and thermal shutdown circuit.
    • Four mode function forward/reverse, brake, stop.
    • Stackable with FiO Glide and FiO Mote series
    • More background information
    Learn More
    20 in stock

    ฿350.00

  2. aMG PWS 3V3/5V v2

    aMG PWS 3V3/5V v2

    • Based on ROHM BD9876AEFJ switching and BU33TD3WG LDO regulators
    • Input: 7-42 VDC
    • 2-Channels fixed outputs: 
      • 3.3VDC 200mA Max.
      • 5VDC 3A Max.
    • Adjustable single output version available
    • Stackable with FiO Glide and FiO Mote series
    • More background information
    Learn More
    19 in stock

    ฿250.00

  3. aMG Sense - ATMOS - T/H

    aMG Sense - ATMOS - T/H

    Learn More
    2 in stock

    ฿850.00

  4. aMG Sense-Thermocouple

    aMG Sense-Thermocouple

    • Come with MAX31855KASA+ Cold-Junction Compensated Thermocouple-to-Digital Converter. 
    • Work with any K type thermocouple
    • Output -200°C to +1350°C in 0.25 degree resolution (14 - bits)
    • SPI Interface (allowing more than one themocouple to be connected)
    • 3.3VDC power supply
    • Matlab / Simulink Blockset support via Waijung Blockset

    Tutorials and Simulink Demo Files 

     

     

    Learn More
    26 in stock

    ฿650.00

  5. aMG USB Connect

    aMG USB Connect

    • Based on FT231XS-R Full Speed (12 Mbits/sec) USB-UART Converter
    • Enable Automatic Compile and Download (flash programming) when working with Matlab & Simulink, Waijung Blockset, and STM32F0 Target
    • Enable Hardware-in-the-Loop Test
    • Stackable with FiO Glide and FiO Mote series
    • More background information
    Learn More
    8 in stock

    ฿350.00

  6. FiO Glide

    FiO Glide

    • Based on ARM Cortex-M0 nRF51422 MCU
      • 16MHz CPU Frequency Max
      • 256 KB Flash (without Aimagin Bootloader and S310 ANT/BLE Soft Device)
      • 128 KB Flash (with Aimagin Bootloader and SoftDevice)
      • 32 KB RAM
      • 31 GPIO
      • 2.4 GHz RF Transceiver upto 2Mbps data rates
      • Timers: 1 x 32-bits, 2 x 16-bits
      • Comms: SPI, I2C, USART, AES, RTC, Quadrature Decoder
      • 8 Channels 10-bits ADC 
      • 1.8 - 3.6 V
    • Approximate Range (with default short antenna):
      • Outdoor line-of-site: 100 m
      • Indoor between different rooms with wall: 40 m
    • All IO pins available via pin headers upto 31 pins
    • Pin compatible with FiO Mote and other stackable add-on modules, for examples;
      • Temperture/Humidity/Pressure/Light Sensors module
      • Current sense module (to aid low power design)
      • Power supply module
      • Motor driver module
    • Onboard RTC crystal
    • SWD Debugger port available
    • Program via UART using Aimagin bootloader (aMG USB Connect required for USB-to-serial conversion)
    • Support Automatic Compile and Download when working with Matlab & Simulink, Waijung Blockset, and nRF51 Target
    • More background information
    •  

      Matlab & Simulink

      Supported Matlab / Simulink Software (Waijung Blockset)

       

    Learn More
    ฿1,490.00

    Out of stock

  7. FiO Glide Starter Pack

    FiO Glide Starter Pack

    The starter pack include:

    About FiO Glide 

    • Based on ARM Cortex-M0 nRF51422 MCU
      • 16MHz CPU Frequency Max
      • 256 KB Flash (without Aimagin Bootloader and S310 ANT/BLE Soft Device)
      • 128 KB Flash (with Aimagin Bootloader and SoftDevice)
      • 16 KB RAM
      • 31 GPIO
      • 2.4 GHz RF Transceiver upto 2Mbps data rates
      • Timers: 1 x 32-bits, 2 x 16-bits
      • Comms: SPI, I2C, USART, AES, RTC, Quadrature Decoder
      • 8 Channels 10-bits ADC 
      • 1.8 - 3.6 V
    • Approximate Range (with default short antenna):
      • Outdoor line-of-site: 100 m
      • Indoor between different rooms with wall: 40 m
    • All IO pins available via pin headers upto 31 pin
    • Pin compatible with FiO Mote and other stackable add-on modules, for examples;
      • Temperture/Humidity/Pressure/Light Sensors module
      • Current sense module (to aid low power design)
      • Power supply module
      • Motor driver module
    • Onboard RTC crystal
    • SWD Debugger port available
    • Program via UART using Aimagin bootloader (aMG USB Connect required for USB-to-serial conversion)
    • Support Automatic Compile and Download when working with Matlab & Simulink, Waijung Blockset, and nRF51 Target
    • More background information
    •  

      Matlab & Simulink

      Supported Matlab / Simulink Software (Waijung Blockset)

       

    Learn More
    ฿3,740.00

    Out of stock

  8. FiO Glide Starter Pack 2

    FiO Glide Starter Pack 2

    Download the above slide.

    The starter pack include:

    • 2x FiO Glide
    • 2x aMG USB Connect
    • 2x aMG Breadboard  - F
    • 2x USB Cable
    • 4x AA Batteries
    • 1x Carrying Box
    • 1x Training Manual in Thai (Free Download - 4MB) 
      • LAB 1 Install Waijung and Hardware
      • LAB 2 Simulink for beginners
      • LAB 3 Digital Input_Output
      • LAB 4 ADC and Digital Output on Charater LCD
      • LAB 5 ADC and Digital Input Tx and Display character LCD Rx using ANT Network
      • LAB 6 ADC and Digital Input Tx and Rx PC Host using ANT Network
      • LAB 7 Current Sensor
      • LAB 8 Data Logger

    About FiO Glide 

    • Based on ARM Cortex-M0 nRF51422 MCU
      • 16MHz CPU Frequency Max
      • 256 KB Flash (without Aimagin Bootloader and S310 ANT/BLE Soft Device)
      • 128 KB Flash (with Aimagin Bootloader and SoftDevice)
      • 32 KB RAM
      • 31 GPIO
      • 2.4 GHz RF Transceiver upto 2Mbps data rates
      • Timers: 1 x 32-bits, 2 x 16-bits
      • Comms: SPI, I2C, USART, AES, RTC, Quadrature Decoder
      • 8 Channels 10-bits ADC 
      • 1.8 - 3.6 V
    • Approximate Range (with default short antenna):
      • Outdoor line-of-site: 100 m
      • Indoor between different rooms with wall: 40 m
    • All IO pins available via pin headers upto 31 pin
    • Pin compatible with FiO Mote and other stackable add-on modules, for examples;
      • Temperture/Humidity/Pressure/Light Sensors module
      • Current sense module (to aid low power design)
      • Power supply module
      • Motor driver module
    • Onboard RTC crystal
    • SWD Debugger port available
    • Program via UART using Aimagin bootloader (aMG USB Connect required for USB-to-serial conversion)
    • Support Automatic Compile and Download when working with Matlab & Simulink, Waijung Blockset, and nRF51 Target
    • More background information
    •  

      Matlab & Simulink

      Supported Matlab / Simulink Software (Waijung Blockset)

       

    Learn More
    ฿6,440.00

    Out of stock

  9. FiO Mote - ST

    FiO Mote - ST

    • Based on ARM Cortex-M0 STM32F072CB MCU
      • 48MHz CPU Frequency Max
      • 128 KB Flash
      • 16 KB RAM
      • 37 GPIO
      • Timers: 1 Advanced, 6 General Purpose, 2 Basic
      • Comms: 2 SPI, 2 I2C, 4 USART (+LIN), 1 CAN, 1 USB, 1 CEC
      • 10 Channels 12-bits ADC 
      • 2 Channels 12-bits DAC 
      • 2.0 - 3.6 V
    • All IO pins available via pin headers upto 37 pins
    • Pin compatible with FiO Glide and other stackable add-on modules, for examples;
      • Temperture/Humidity/Pressure/Light Sensors module
      • Current sense module (to aid low power design)
      • Power supply module
      • Motor driver module
    • Onboard 8MHz crystal (for HSE clock)
    • SWD Debugger port available
    • Program via built-in STMicroelectronics' UART IAP Protocol (aMG USB Connect required for USB-to-serial conversion)
    • Support Automatic Compile and Download when working with Matlab & Simulink, Waijung Blockset, and STM32F0 Target
    •  

      Matlab & Simulink

      Supported Matlab / Simulink Software (Waijung Blockset)

    Learn More
    8 in stock

    ฿450.00

  10. FiO Mote - ST Starter Pack

    FiO Mote - ST Starter Pack

    The starter pack include:

    About FiO Mote - ST

    • Based on ARM Cortex-M0 STM32F072CB MCU
      • 48MHz CPU Frequency Max
      • 128 KB Flash
      • 16 KB RAM
      • 37 GPIO
      • Timers: 1 Advanced, 6 General Purpose, 2 Basic
      • Comms: 2 SPI, 2 I2C, 4 USART (+LIN), 1 CAN, 1 USB, 1 CEC
      • 10 Channels 12-bits ADC 
      • 2 Channels 12-bits DAC 
      • 2.0 - 3.6 V
    • All IO pins available via pin headers upto 37 pins
    • Pin compatible with FiO Glide and other stackable add-on modules, for examples;
      • Temperture/Humidity/Pressure/Light Sensors module
      • Current sense module (to aid low power design)
      • Power supply module
      • Motor driver module
    • Onboard 8MHz crystal (for HSE clock)
    • SWD Debugger port available
    • Program via built-in STMicroelectronics' UART IAP Protocol (aMG USB Connect required for USB-to-serial conversion)
    • Support Automatic Compile and Download when working with Matlab & Simulink, Waijung Blockset, and STM32F0 Target
    •  

      Matlab & Simulink

      Supported Matlab / Simulink Software (Waijung Blockset)

    Learn More
    In stock

    ฿1,080.00

10 Item(s)

per page

Grid  List 

Set Descending Direction