SKU
waijung2_for_zynq_7000
As low as ฿8,800.00
Waijung 2 for Zynq 7000
Professional (Academic)-1year
Commercial-1year

Waijung 2 for Zynq 7000

SKU
waijung2_for_zynq_7000
In stock

Waijung 2 for Xilinx Zynq-7000 Key Features

  1. Generate source code and executables for Xilinx Zynq-7000 Processing System (ARM Cortex-A9 core) directly from MATLAB & Simulink.
  2. Support Xilinx native tools and toolchain (Vivado design suite, Vitis IDE and Xilinx Software Command-line Tool (XSCT)).
  3. Ability to download executables to Flash or SD card or JTAG.
  4. IEC-62304 certifiable.
  5. Operating system: Bareboard and FreeRTOS.
  6. Compatible with all simulink blocks that support Simulink embedded coder.
  7. Work with MATLAB version from 2020a or later.
  8. Applicable to all Zynq-7000 family (based on the Vivado hardware design).
  9. Support Processor-in-the-Loop (PIL) and External mode with Ethernet and Serial communication interfaces.
  10. Demos based on Digilent Zybo Z7-20 boards.

Zynq-7000 Key Features

  1. Processor (ARM Cortex-A9) and FPGA systems in one chip.
  2. Processing System (PS): ARM Cortex-A9 dual or single core.
    1. Clock:
      1. Single Core: Up to 667 MHz or 766MHz
      2. Dual Core: Up to 667MHz or 766MHz or 800MHz or 866MHz or 1GHz
    2. RAM: 256KB on-chip RAM and 16-bit or 32-bit interfaces to DDR3, DDR3L, DDR2, or LPDDR2 memories
    3. Flash:
      1. 8-bit SRAM data bus with up to 64 MB support
      2. Parallel NOR flash support
      3. ONFI 1.0 NAND flash support (1-bit ECC)
      4. 1-bit SPI, 2-bit SPI, 4-bit SPI (quad-SPI), or two quad-SPI (8-bit) serial NOR flash
  3. Programmable Logic (PL)
    1. Configurable Logic Blocks
      1. Look-up tables (LUT)
      2. Flip-flops
      3. Cascadable adders
    2. 36 Kb Block RAM
    3. Two 12-Bit Analog-to-Digital Converters

User Guide

Applications

  1. Advanced driver-assistance system (ADAS).
  2. Carrier Ethernet Backhaul.
  3. Machine Vision.
  4. Medical Endoscope.
  5. Multi-Axis Motor Control.
  6. Multi-function Printers.
  7. Professional Cameras.
  8. Programmable Logic Controller.
  9. Small Cell Baseband.

Waijung 2 for Zynq 7000 Packages

Packages (License types) [1]* Professional
(Academic)
Commercial
Best forLecturers and ResearchersCommercial product development
Feature setFull-featured but without generated source code or executable. NOT for mass production.Full-featured with generated source code and executable. Ideal for mass production.
PriceIf you are interested to buy more than 5 licenses, kindly check the packages we offer.8,800 THB/Year56,000 THB/Year
Duration1 Year1 Year
BlocksWhen to use
- Waijung 2 Target Setup block This block must be included in every Simulink model. Use this block to configure parameters related to code generation for the target hardware.
- Digital Output block Use this block to generate digital signal(s) from selected MCU pin(s).
- Digital Input block Use this block to read digital signal(s) from selected MCU pin(s).
- UART blocks Use this block to send and receive data via UART serial communication.
- SPI block Use this block to send and receive data via SPI serial communication.
- I2C block Use this block to send and recieve data via I2C serial communication.
- SD Card block Use this block to setup, read, and write a SD card.
- Debounce block Use this block to reject glitches or unstable digital input (from Button or Switch)
- Ethernet Setup block Use this block to set up the on-board Ethernet module(s)
- TCP UDP block Use this block to send and receive data via TCP or UDP protocol
- Timer Interrupt block Use this block to create Timer Interrupt Service Routine (ISR).
- ADC block Use this block to read analog signal.
- AXI Stream block Use this block to set up read and write data through the AXI stream interface.
- AXI Memory map block Use this block to read values from the given memory registry address or write to the given memory registry address using memory map via AXI-4 interface
- Generated source code Generated source codes are available for inspection and modification out side of MATLAB Simulink environment.
- Generated bin file Complied executable file (. bin) is available for later upload to other Zynq-7000 target (for Mass Production).
Technical Support Request Channel
- Forum (Community)
- Email
- Service request (ticket) system
- Onboarding call
- Voice over IP (VoIP) [3]*
Type of Technical Support
- Installation
- Bug fixes
- Feature request
- Customization [2]*
- Project based [2]*
Within 3 day [4]* Within 1 day [4]*
Remark
[1]* Professional (Academic) and Commercial license types are annual licenses. Annual licenses provide the right to use and upgrade the software for a fixed duration of 12 months.
[2]* Require purchase of separate support package. Customization such as new feature implementations.
[3]*Only with active purchased support package.
[4]* When request using the Service request system during business day.
PackageProfessional (Academic)
Best forLecturers and Researchers
Feature setFull-featured but without generated source code or executable. NOT for mass production.
Price8,800 THB/Year
Duration1 Year
Block
- Waijung 2 Target Setup block
- Digital Output block
- Digital Input block
- UART blocks
- SPI block
- I2C block
- SD Card block
- Debounce block
- Ethernet Setup block
- TCP UDP block
- Timer Interrupt block
- ADC block
- AXI Stream block
- AXI Memory map block
- Generated source code
- Generated bin file
Technical Support Request Channel
- Forum (Community)
- Email
- Service request (ticket) system
- Onboarding call
- Voice over IP (VoIP)
Type of Technical Support
- Installation
- Bug fixes
- Feature request
- Customization [2]*
- Project based [2]*
Time to ResponseWithin 3 day [4]*
Remark
[1]* Professional (Academic) and Commercial license types are annual licenses. Annual licenses provide the right to use and upgrade the software for a fixed duration of 12 months.
[2]* Require purchase of separate support package. Customization such as new feature implementations.
[3]* Only with active purchased support package.
[4]* When request using the Service request system during business day.

Price Packages

Product NamePrice Package for 1-5 Licenses
(per license)
Price Package for 6-10 Licenses
(per license)
Price Package for 11-20 Licenses
(per license)
Price Package for 20+ Licenses
(per license)
Waijung 2 for Zynq-7000 Commercial56,000.00 THB50,400.00 THB44,800.00 THB39,200.00 THB
Waijung 2 for Zynq-7000 Professional (Academic)8,800.00 THB7,920.00 THB7,040.00 THB6,160.00 THB

Development Roadmap

  1. AXI Memory map block
  2. Flash block
  3. CAN bus block
  4. PWM block
  5. Firmware Upgrade block
  6. XCP block
Write Your Own Review
You're reviewing:Waijung 2 for Zynq 7000
Your Rating